Automatic Electrostatic Powder Coating Line For Car Brake Pads--Part 1

Electrostatic powder coating line for car  pad

1. Coating : automatic powder coating

2. Drying tunnel heating: electric heating

3. Hanging distance: 600 mm one at a time distance

Automatic Electrostatic Powder Coating Line For Car Brake Pads OEM

I.Design basis(user supply)
1. product name: brake pads
2. material: Iron-pieces
3. product max size: L150×W150×H30(mm)
4. product max weight: ≤30Kg
5. Conveyor chain single hanging weight: 0.35Kg model:QXG(200)
6. Hanging: one hangers one piece product
7. Hanging distance: 600 mm one at a time distance, hang from actual set according to different workpiece
8. Design line speed and adjustable line speed: 1.5m/min
9.coating area: surface
10. coating : automatic powder coating
11. Drying tunnel heating: electric heating
12. Compressed air: the users themselves, freeze-drying, moisture content <1.3g/m3 oil content <1PPM
13. Plant area: see Figure
14. Energy: (1) three-phase five-wire (380V). With a ground wire (2) Compressed air

II,Pipeline process (V＝1.5m/min)
Surface pretreatment and put on the line into spray booth
curing oven take out( cool) offload
Remark:Send Good spraying workpieces into the oven and shut down the conveying
chain, then close the oven door, open the oven heating, set 180 ℃, holding time for 20
minutes, keep warm until the oven automatically cut off power supply, open the oven
door and conveyor chain, after workpiece out spray painting another product.

Source:

http://www.powder-coatingline.com/china-automatic_electrostatic_powder_coating_line_for_car_brake_pads_oem-1178899.html